Countertop Ongoing Care Kit

Countertop Ongoing Care Kit includes:

(2) Quarts of MB-5 Stone & More Multi Surface Spray Cleaner

(1) Quart of MB-13 Stone Shine Spray Polish

MB Stone Care Countertop Ongoing Care Kit comes complete with everything you need to clean and and protect your natural stone surfaces. Use the MB-5 Stone & More Multi Surface Spray Cleaner to clean all your natural stone surfaces, including fixtures, glass, and mirrors. Use the MB-13 Stone Shine Spray Polish to restore the shine on your countertops, repel water and reduce fingermarks.

MB-5 Stone & More Multi Surface Spray Cleaner uses a pH neutral combination of special chemicals that quickly and easily cleans marble, granite, ceramic, corian, porcelain, glass, including mirrors and most other hard surfaces. It also works great on bath and kitchen fixtures. Safe to use daily. Not designed to clean heavily soiled areas or remove soap build up. (For heavy duty cleaning and removal of soap build up, use our MB-3 Soap & Mineral Deposit Remover.)

Directions for use: Hold sprayer about 6 to 8 inches from surface, then spray a light mist over the area to be cleaned. Let the product sit for approximately 30 seconds. Buff the surface dry with a paper towel or a clean white cloth. When towel becomes wet, discard and start with a fresh one.

MB-13 Stone Shine Spray Polish penetrates, enhances, protects, smooths and beautifies all polished stone surfaces. It adds shine and creates a protective shield that repels water, reduces finger marks, and makes routine cleaning easier! It also visually restores slightly worn down surfaces to like-new condition! It's a terrific product for polished stone countertops, shower enclosures and stainless steel surfaces.

Directions for use: Do not use on floors. Shake well before use. Clean the stone surface thoroughly, using our MB-5 Stone & More Multi Surface Spray Cleaner, or for heavy duty situations, our MB-3 Soap & Mineral Deposit Remover prior to using MB-5 Stone & More. Allow surface to dry to a streak free look. Apply MB-13 Stone Shine by spraying sparingly, but thoroughly over the surface. Buff to a uniform finish using a clean white piece of terry cloth. If you notice some smearing occurring, stop buffing, wait another minute or so, then buff again with a clean white piece of terry cloth. If streaking persists, spray a little bit more product and buff immediately to blend. When first used, a repeat application may be called for. MB-13 Stone Shine may need to be reapplied in a few days or a few weeks according to the intensity of use of the surface on which the product is applied. Contains foodgrade emulsifiers.